“This week may be more of a 5-wood week just because, like you said, the golf course is going to play really long, the rough is thick, and the run-up areas after this kind of rain are going to be really soft, and the greens are still going to be really firm because they’re new,” he said Tuesday. “You have to be able to land the ball up on the green. You can’t really run it up around this golf course. That’s one aspect that you’ve got to think about.”
Scheffler first put a 7-wood in play at Torrey Pines for the Genesis Invitational, but brought it back this week to help him get out of the thick wet rough.
In testing, the 7-wood launched 1.5 degrees higher than Scheffler’s 3-iron which he uses most weeks and had 1500 RPMs more spin. TaylorMade Senior Tour Manager Adrian Rietveld, who was busy this week with a lot of 7- and 9-wood builds, told GOLF the high-lofted fairway woods can be so valuable because they serve dual purposes by increasing land angle and helping players get out of the rough.
Rietveld bent Scheffler’s 7-wood a degree upright compared to how he played it at Torrey Pines.
The other major change for Scheffler was that this was his second week since switching back a Vokey .06 Low Bounce K-Grind lob wedge. Scheffler had played the Low Bounce K in early 2022, when he got his first four PGA Tour wins and first Masters title, before gaming the narrower .04T Grind in his 60. The World No. 1 re-inserted the Low Bounce K before the Byron Nelson and is now 2-for-2 with the new lobber.
While Scheffler’s ball striking seemed uncharacterically leaky for him this week (he was still 14th in strokes gained: approach), his scrambling was sharp as ever, and he was fifth in the field in strokes gained: around-the-green (4.832).
Backup or not, asside from a few pulls on the front nine Sunday, Scheffler’s driver was a weapon, finishing fifth in the field in strokes gained: off-the-tee (4.835).
Keep reading below for Scheffler’s full specs.
Scottie Scheffler’s winning clubs at the 2025 PGA Championship
Scottie Scheffler plays the TaylorMade Qi10 (DOT) driver.Alex Slitz/Getty Images
Wrapped in a clean and confident package, the Qi10 driver has been strategically engineered to help players optimize distance and enhance forgiveness.
THE QUEST FOR INERTIA
TaylorMade’s goal with the Qi10 family is to make each driver as forgiving as possible, using advanced multi-material constructions to increase inertia. Qi10 is engineered for a balanced blend of distance and forgiveness.
COMPLETE PERFORMANCE
The Qi10 Driver features a lower CG projection and higher MOI than its predecessor, delivering balanced performance without any tradeoffs.
NEW INFINITY CARBON CROWN
An Infinity Carbon Crown covers 97% of the total crown area, creating a strategic advantage for mass redistribution and enhanced forgiveness.
VENTUS shafts by Fujikura are #1 on Tour. Learn more about which VENTUS is right for you and schedule your fitting today to upgrade your consistency in your long game.
Scheffler has used the TaylorMade P7TW irons for all 15 of his PGA Tour wins.TaylorMade
Irons: Srixon ZU85 (4), TaylorMade P7TW (5-PW), Nippon N.S. Pro Modus 3 Hybrid Prototype 10 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)(Length: +.25″, Lie: 1 degree upright) Loft Progression: 23/26/30/34/38/42/46
TaylorMade P7TW Custom Irons
MILLED GRIND SOLE DEBUT
Milled Grind eliminates variances in sole geometry from head to head and ensures precision in every iron set, while the CNC machined sole geometry and a precise leading edge promote consistent turf interaction.
TIGER’S FINGERPRINT
Each iron has been meticulously shaped to meet Tiger’s discerning eye—longer blade length, thinner topline, progressive face height, and more.
For every shot, every lie, every course, there’s a grind fit for your swing. Finding the right grind to match your swing and playing conditions will give you the best turf interaction, contact and shot performance. Master Craftsman Bob Vokey has spent decades crafting, developing and improving his tour proven grinds to fit players of all levels.Anyone can manufacture a wedge, but it takes a master to turn a piece of high-performance technology into an instrument of creative control. Bob’s six tour-proven grinds are designed to offer maximum creativity, versatility and consistency, all meticulously developed through years of working with the best players in the world.
PROGRESSIVE CENTER OF GRAVITY
SM9 features a progressive center of gravity (CG) throughout the lofts, which optimizes ball flight, accuracy and forgiveness. Using tapered top lines and varied hosel lengths, the Vokey R&D team has raised the height of the CG in the higher lofts, which promotes a lower, more controlled flight.The CG is also forward of the face, resulting in increased MOI, exceptional feel and a club face that simply wants to square up at impact.
SPIN MILLED GROOVES
SM9’s patented Spin Milled grooves are meticulously engineered through a new cutting process to maximize spin and durability. The process starts by cutting the face perfectly flat with a high-speed saw. Then every groove is individually cut based on loft and finish; low lofts (46°-54°) are designed with narrower, deeper grooves, while higher lofts (56°-62°) have wider, shallower grooves.Micro-grooves are individually cut in between grooves, which maximize spin on partial shots. A proprietary heat treatment is applied to the impact area which doubles the durability of the groove without impacting feel, making it the most durable groove in golf. The process is only complete when every Vokey wedge is 100% inspected for utmost quality and performance.
Scheffler switched to the Spider Tour X last year.TaylorMade
Putter: Spider Tour X (Loft 3˚, Lie 72˚), L-Neck, Full Line, Pure Roll insert, 35 1/2″ EOG, Golf Pride Pro Only grip
TaylorMade 2025 Spider Tour Black Custom Putter
BLACK PVD FINISH The durable PVD coating creates a beautiful high-quality finish with sole plate, back badge and copper accents.
TRUE PATH™ ALIGNMENT The patented alignment system provides visual clarity and helps golfers better envision the line to the hole.
WHITE TPU PURE ROLL™ INSERTMade from a combination of Surlyn and aluminum, the white TPU Pure Roll™ insert creates a softer feel.Grooves are angled at 45° to encourage optimal forward roll as well as better sound, feel and overall roll characteristics. The white insert also creates better symmetry with the white True Path alignment.
THIN WALL UNDERCUT CONSTRUCTION We’ve engineered a super stable structure by removing excess weight to create high MOI and legendary Spider performance.
HYBRAR ECHO®DAMPENER HYBRAR is behind the face to dampen unwanted vibrations, delivering premium sound and feelon every putt with the best possible sensation.
TSS WEIGHTING TSS weights provide balanced weighting and help optimize performance for all various putter lengths.
STEEL WIREFRAME Allows engineers to better control weight distribution and CG location.
Grip:Golf Pride Tour Velvet Rib 58 (6 wraps double sided tape)
Golf Pride Tour Velvet
The modern-day grip standard. Tour Velvet is the perfect blend of state-of-the-art rubber and a one-of-a kind plus sign texture for all-around playability. The ultimate combination of comfort and performance is what makes Tour Velvet the most popular grip in golf today.
Jack Hirsh is the Associate Equipment Editor at GOLF. A Pennsylvania native, Jack is a 2020 graduate of Penn State University, earning degrees in broadcast journalism and political science. He was captain of his high school golf team and recently returned to the program to serve as head coach. Jack also still *tries* to remain competitive in local amateurs. Before joining GOLF, Jack spent two years working at a TV station in Bend, Oregon, primarily as a Multimedia Journalist/reporter, but also producing, anchoring and even presenting the weather. He can be reached at jack.hirsh@golf.com.
